Saturday, December 22, 2012

Reset Process for Cricut machines

Reset Process for CricutTM machines

If your machine freezes, experiences power problems, cutting issues, or anything out of the realm of normal Cricut behavior, this reset procedure is a good place to start the troubleshooting process. This will usually resolve the issue.
  • First, turn your machine on with no cartridge loaded. Then you are going to roll all your gray dials (the two on the left and the one on the right) down to their lowest setting.
  • Then you will want to grasp the green/gold cylinder blade assembly and use it to pull the entire gray carriage car unit (the one with the Cricut bug on it) along its track to the other side of the machine. Back in the area where the gray carriage car usually sits there is a red button. Press that button and hold it down for about three seconds. Let go and then move the gray carriage car back into place.
  •    Now you're going to roll all your dials all the way up and all the way down three times--three times for each dial.
  • Then you are going to hit the "Cut" button and turn the machine off. Let the machine sit for a few minutes (15-20), load a cartridge, turn it on, and try a practice cut.
 * Information provided was gathered from other sources and is provided "as is".
** "Cricut" is a trademark of ProvoCraft Inc. This site is not affiliated with ProvoCraft .